How much used oil actually remains in an EVO engine and the lines during a normal oil change?
Exactly, almost 1 liter of contaminated oil remains in the oil circuit during a conventional oil change.
It doesn't have to be, you can significantly increase the service life of the engine with clean OIL
It's easy with the tool
Proceed as before until the oil filter is changed.
So drain the old oil, close the drain again
Simply mount the MAXTOOL08 cnc machined cartridge after dismantling the oil filter
Completely 100% perfect fit and with a big, sufficiently long transparent tube
So you can see how much used oil is still in your engine when changing the oil
Top up with new oil (normally specified filling quantity)
Then operate the starter and start
After about 600-1000ml filling quantity you can only see that until then
only contaminated used oil has leaked through the transparent hose.
Then you dismantle the MAXTOOL08 and mount the new oil filter
Only now do you fill up the oil tank (according to the manufacturer's instructions) and measure the oil level
That's it ... from now on you always have fresh oil after an oil change and no 30% contaminated old oil in the engine and oil circuit
Your engine will thank you. Remember what a new engine would cost
Suitable for all EVO 1340 and identical motors from other manufacturers such as S&S / Merch / Ultima / Revtech / Delkron
Supplement: The Sportster model is based on the tool, but the Sportster version also includes the branch and the oil drain hose, as well as the necessary small parts. PICTURES 4 and 5 show the complete scope of delivery of the version for the Sportster. Assembly instructions are included.